Monday, 22 December 2014
One of the latest inventions presented at the CeBIT (Centrum der Büro- und Informationstechnik; German for "Centre of Office and Information technology"), which is the largest computer exposition in the world is dubbed "silent sounds." The technology converts lip motion into a computer-generated voice for the person on the other end of the phone. It is worth mentioning that "silent sounds" tech was developed by the Karlsruhe Institute of Technology (KIT). This latest invention makes use of electromyography, monitoring small muscular motions that take place when a person speaks, transforming them into electrical pulses which are afterwards converted into speech.
Tongue Drive System to Operate Computers
Scientists developed a new revolutionary system to help individuals with disabilities to control wheelchairs, computers and other devices simply by using their tongue. Engineers at the Georgia Institute of Technology say that a new technology called Tongue Drive system will be helpful to individuals with serious disabilities, such as those with severe spinal cord injuries and will allow them to lead more active and independent lives.
Individuals using a tongue-based system should only be able to move their tongue, which is especially important if a person has paralyzed limbs. A tiny magnet, only a size of a grain of rice, is attached to an individual's tongue using implantation, piercing or adhesive. This technology allows a disabled person to use tongue when moving a computer mouse or a powered wheelchair.
Scientists chose the tongue to control the system because unlike the feet and the hands, which are connected by brain through spinal cord, the tongue and the brain has a direct connection through cranial nerve. In case when a person has a severe spinal cord injure or other damage, the tongue will remain mobile to activate the system. "Tongue movements are also fast, accurate and do not require much thinking, concentration or effort." said Maysam Ghovanloo, an assistant professor in the Georgia Tech School of Electrical and Computer Engineering.
The motions of the magnet attached to the tongue are spotted by a number of magnetic field sensors installed on a headset worn outside or an orthodontic brace inside the mouth. The signals coming from the sensors are wirelessly sent to a portable computer that placed on a wheelchair or attached to an individual's clothing.
The Tongue system is developed to recognize a wide array of tongue movements and to apply specific movements to certain commands, taking into account user's oral anatomy, abilities and lifestyle."The ability to train our system with as many commands as an individual can comfortably remember is a significant advantage over the common sip-n-puff device that acts as a simple switch controlled by sucking or blowing through a straw," said Ghovanloo.
The Tongue Drive system is touch-free, wireless and non-invasive technology that needs no surgery for its operation.
During the trials of the system, six able-bodied participants were trained to use tongue commands to control the computer mouse. The individuals repeated several motions left, right, up and down, single- and double-click to perform computer mouse tasks.
The results of the trials showed 100 percent of commands were accurate with the response time less than one second, which equals to an information transfer rate of approximately 150 bits per minute.
Scientists also plan to test the ability of the system to operate by people with severe disabilities. The next step of the research is to develop software to connect the Tongue Drive system to great number of devices such as text generators, speech synthesizers and readers. Also the researchers plan to upgrade the system by introducing the standby mode to allow the individual to eat, sleep or talk, while prolonging the battery life.
Saturday, 13 December 2014
COMPUTER GENERATIONS
1-FIRST GENERATION OF COMPUTER(1942-1955)
- First generation of computer was based on vacuum tubes and it was developed by two scientists “MAUCHLY AND ECHERT” at Census department of United States in 1947.
- Vacuum tubes were the only electrical component available during those days.
- Vacuum tube technology made possible to make electronic digital computers.
- These computers could calculate data in millisecond.
- They were fastest calculating devices of their time.
- They were too bulky in size, requiring large rooms for installation.
- They consumed a large amount of energy.
- They heated very soon due to thousands of vacuum tubes. Hence, the rooms/areas in which these computers were located had to be properly air-conditioned.
- They were not very reliable and constant maintenance was required.
- Used magnetic drums which provide very less data storage.
- Used machine language only.
- Costly commercial production and had very slow speed.
- As vacuum tubes used filaments, they had limited life. Because a computer used thousands of vacuum tubes, these computers were prone to frequent hardware failures.
- Limited programming capabilities.
- Used punch cards for input and printouts for output.
- Non-versatile, very faulty and not portable.
- Since these computers were difficult to program and use, they had limited commercial use.
2-SECOND GENERATION OF COMPUTER(1955-1964)
- Second generation of computer was based on transistors and it was developed by “JOHN BARDEEN, WILLIAN SHOCKLEY AND WALTER BRATTAIN” at Bell Laboratories in 1947.
- These computers could calculate data in microseconds.
- They were smaller than first generation computers and required smaller place.
- They were more than ten times faster than the first generation computers.
- They consumed less power and dissipated less heat than the first generation computers.
- The rooms/areas in which the second generation computers were located still required to be properly air-conditioned.
- They were better portable as compare to 1st generation computers and had better speed.
- Used faster peripherals like tap drives, magnetic disks, printer etc.
- On software front, high-level programming languages(like FORTRAN, COBOL, ALGOL, and SNOBOL) and batch operating system emerged during second generation.
- Accuracy improved in second generation.
- They were the first stored instructions in memory which moved from magnetic drum to magnetic core technology.
- Magnetic cores are small rings made of ferrite that can be magnetized in either clockwise or anti-clockwise direction.
- They were costly and not versatile.
- They were more reliable and less prone to hardware failures than the first generation computers.
- They were used only for specific purposes.
- They were easier to program and use than the first generation computers. Hence, they had wider commercial use.
- In these computers, thousands of individual transistors had to be assembled manually by hand into electronic circuits making commercial production of these computers difficult and costly.
3- THIRD GENERATION OF COMPUTER(1964-1975)
- Third generation of computer was based on integrated circuits(ICs) and it was developed by JACK ST. CLAIR KILBY and ROBERT NOYCE in 1958.
- ICs are circuits consisting of several electronic components like transistors, resistors and capacitors grown on a single chip of silicon eliminating wired interconnection between components.
- IC technology was also known as “microelectronics” technology because it made it possible to integrate larger number of circuit components into very small (less than 5mm square) surface of silicon, known as “chip”.
- They were more powerful than second generation computers.
- They were capable of performing about 1 million instructions per second.
- In this generation remote processing, time sharing, multi programming operating system were used.
- They were smaller than second generation computers requiring small space.
- They consumed less power and dissipated less heat than second generation computers.
- The rooms/areas in which third generation computers were located still required to be properly air-conditioned.
- They calculate data in nanoseconds.
- They were more reliable and less prone to hardware failures than second generation computers requiring lower maintenance cost.
- High level languages (COBOL, PASCAL, BASIC, ALGOL-68 etc) were used.
- They had faster and larger primary and secondary storage as compare to second generation computers.
- They were general-purpose machines suitable for both scientific and commercial applications.
- Mini computers of third generation made computers affordable even by smaller companies.
- Timesharing operating system allowed interactive usage and simultaneous use of these systems by multiple users.
4-FOURTH GENERATION OF COMPUTER(1971-1980)
- Average number of electronic components packed on a silicon chip doubled each year after 1965. This progress soon led to the era of large scale integration (LSI) when it was possible to integrate over 30,000 electronic components on a single chip, followed by very large scale integration (VLSI) when it was possible to integrate about 1 million electronic components on a single chip.
- It started with the invention of microprocessor. The microprocessor contains thousands of ICs.
- It contains 5000 transistors and associated on a single chip.
- PCs were smaller and cheaper than mainframes or minicomputers of third generation.
- Although the fourth generation mainframes and supercomputers required proper air-conditioning of the rooms/areas in which they were located, no air-conditioning was required for PCs.
- They consume less power than third generation computers.
- They were more reliable and less prone to hardware failures than third generation computers requiring negligible maintenance cost.
- They had faster and larger primary and secondary storage as compared to third computer generation computers.
- They were general purpose machine.
- All high languages like C, C++, DBASE etc used in this generation.
- PCs of fourth generation made computers affordable even by individuals for their personal use at home.
- They were more powerful, compact, portable and reliable.
- Concept of internet introduced in this generation and great development in the fields of networks.

5-FIFTH GENERATION OF COMPUTER(1989-ONWARDS)
- It is based on artificial intelligence (AI).
- VLSI technology became ULSI (Ultra Large Scale Integration) technology.
- Portable PCs (called notebook computers) are much smaller and handy than PCs of fourth generation allowing users to use computing facility even while travelling.
- Fifth generation desktop PCs and work stations are several times more powerful when PCs of fourth generation.
- They consume less power than their predecessors do.
- They are more reliable and less prone to hardware failures than their predecessors were, requiring negligible maintenance cost.
- Although fifth generation mainframes and supercomputers require proper air-conditioning of the rooms/areas in which they are located no air-conditioning is normally required for notebook computers, desktop PCs and workstations.
- They have faster and larger primary and secondary storage as compare to their predecessors.
- They are general purpose machines.
- Use of standard high level programming languages allows programs written for one computer to be easily ported to and executed on another computer.
- More user-friendly interfaces with multimedia features make the systems easier to learn and use by anyone, including children.
- Newer and more powerful applications, including multimedia applications, make the systems more useful in every application.
- Explosion in the size of the internet coupled with Internet-based tools and applications have made these systems influence the life of even common people.
- With so many types of computers in all price ranges today, we have a computer for almost any type of user whether the user is a child or a world-fame scientist.
Subscribe to:
Posts (Atom)









